Cans Jars Tins Beverage Bottling Equipment , Bottle Unscrambler
Machine
Part One. Equipment Show
After–sales service:
We guarantee the quality of the main parts within 12 months. If the
main parts go wrong without artificial factors within one year, we
will freely provide them or maintain them for you. After one year,
if you need to change parts, we will kindly provide you with the
best price or maintain it in your site. Whenever you have technical
question in using it, we will freely do our best to support you.
Installation and training:
We provide training if the technical engineers of the buyer coming
to our company. If the buyer needs our engineer to install and
training at buyer's spot, the buyer should pay for the visa cost,
air ticket, and accommodation and salary, etc. The engineer’s
salary is 120USD per day and the technician’s salary is 80USD per
day.
Part Two. Equipments Introduction
1. Bottle unscrambler introduction:
LP series unscrambler is a bottle collocating equipment of
internationally advanced level- elevator technology we developed on
basis of introduced technology with a consideration of a propensity
of domestic beverage filling facilities towards high-speed
production.
The body machine is barrel shape, with adjustable horses in the
bottom of outer rounding, to adjust the height and level of the
machine. An inner and an outer rotary barrel are positioned round
the double-line bearings inside the body machine. The outside of
inner rotary barrel is equipped with bottle tank, and inside with
equivalent elevator. The corresponding bottle distributor is also
equipped on the outer barrel. An umbrella-tower is centered in the
machine. Bottles are conveyed to the middle of the machine through
elevator upon signals of bottle absence, falling from the
umbrella-tower to the fringes. Bottles are pushed into bottle tank
by cams in the elevator. The circulation of the machine is
accompanied by the elevator thrice. Every elevator Bottles in
distributor will be transported into air conveyor through star
wheels.
2. Main features:
1) Outer canister, rotary canister and contact parts with bottles
are made of S/S SUS304. Frames are welded with carbon steel of fine
quality, with anti-rust treated and sprayed of surface.
2) Body of canister is sealed, and kept with slight positive
pressure to prevent dust.
3) Top of canister is equipped with removable cover, easy to
maintain and clean.
4) Equipped with defective bottle rejection device. No need to stop
to clean up in usual condition. Blocks from mass defective bottles
in bottle. The testing switch in the machine will alarm and stop
the machine. Operators can dredge it according to signals.
5) Specially designed bottle tank can apply to bottles of
dimensions at small difference, no need to change tank to save
investment. E.g. if you want to change 600ml with 500ml with same
diameter, only 30mm shorter, you need not to change the tank, just
do some adjustment.
6) The midst of canister is equipped with exit for mold replacing,
easy for dismantlement and clean up of bottle tank.
7) The under of canister is equipped with maintenance exit, easy
for operators to contact the bottom of machine.
8) Equipped with manual operators.
9) Prefect safeguard device.
10) Bottle-jam inspector is equipped on out-feed star wheels to
safeguard machine.
11) Equipped with oil filling port to lubricate the gears,
bearings, and cams.
12) Main motor is SEW.
13) Main electrical components (frequency inverter, PLC, photocells
and relays) use MITSUBISHI OMRON SIEMENS products.
14) Pneumatic system uses FESTO products of Germany.
3. Main technical parameter:
| Type | GD-LP-15000 |
| Station | 18 |
| Production capacity | 15000bph (500ml) |
| Pressure of air supply | 0.7Mpa |
| Air consumption | 2m3/min |
| Applicable bottles | Diameter 50~96, bottle height 165~310 |
| Main motor power | 3Kw |
| Overall dimension | Ф2600×2300 (diameter×height) |
| Machine weight | 2000Kg |
